Dried Flower Holder


Knock together this dried flower holder, use standard size 3/4" thick cedar fence boards and decorate it with a length of sisal twine.


Cut two 12" lengths from the cedar fence board, rip them in half, then rip them to 2 1/2" wide, cut the base to size from the remainder of the board, sand the ends and sides and surfaces of all pieces.



Finish with danish oil and wrap twine around column.


Material Needed

3' long 1x6 cedar fence board

1 1/2" (4d) finishing nails


Danish oil

Length of twine


 Tools Required

Table Saw


Cross-cut saw and rip saw